VOOPOO DRAG S PRO 80W STARTER KIT

Parameters:

Size: 125.5 x 28.8 x 34.5mm
Material: Alloy & leather & Stainless steel & PCTG
Battery: built-in 3000mah battery
Capacity: 5.5ml
Output: 5-80W
Output voltage: 0-8.5V
Mode: VW/ TC/ RBA/ smart modes
Resistance ranges: 0.1-3ohm
Charging: Type-C, 5V/2.5A
Resistance: TPP-DM1, 0.15ohm mesh coil(60-80W)
TPP-DM4, 0.3ohm mesh coil(32-40W)

Category: Device

Voopoo Drag S Pro Pod Mod Kit consists of Drag S Pro Device and TPP X Pod. Drag S Pro is powered by 3000mah built-in battery with type-C 5V/2.5A fast charging and adjustable wattage of 5-80W. And it adopts 0.96 inch TFT screen to show vaping data and supports Auto & manual modes to meet different needs.Upgraded 5.5ml TPP X Pod applied New TPP DM4 coil and Press the semi-hidden button and rotate to refill on the side, more sanitary. Voopoo Drag S Pro combines 360° infinite airflow system and bottom airflow for MTL vaping to enjoy smooth and rich flavor. Voopoo Drag S Pro Kit features Gene Fan 3.0 chip with 20% performance improvement and one button switch to enjoy two experience freely. Voopoo Drag S Pro continues the premium texture of metal and leather with ergonomic rounded design to fit the curved curvature of the fingers.

Parameters:

Size: 125.5 x 28.8 x 34.5mm
Material: Alloy & leather & Stainless steel & PCTG
Battery: built-in 3000mah battery
Capacity: 5.5ml
Output: 5-80W
Output voltage: 0-8.5V
Mode: VW/ TC/ RBA/ smart modes
Resistance ranges: 0.1-3ohm
Charging: Type-C, 5V/2.5A
Resistance: TPP-DM1, 0.15ohm mesh coil(60-80W)
TPP-DM4, 0.3ohm mesh coil(32-40W)

Features:

Powered by built-in 3000mah battery
Gene Fan 3.0 chip
Adjustable wattage of 5-80W
The combination of 360° infinite airflow system and bottom airflow for MTL
One button switch, dual experience, switch freely
0.96″ TFT screen
Applied New TPP DM4 coil
Ergonomic rounded design that perfectly fits the curved curvature of the fingers
Press the semi-hidden button and rotate to refill on the side
Auto & manual modes

-10%

Click to enlarge

Back to products

Original price was: 145.00 د.إ.Current price is: 130.00 د.إ.

Add to wishlist

Description
Reviews (0)

Description

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “VOOPOO DRAG S PRO 80W STARTER KIT”

Related products

-18%

Quick view

Geekvape Aegis One Kit in Dubai,Abu Dhabi,Sharjah, Al Ain,UAE

Device

Color	Clear

Select options

Geekvape Aegis One & 1FC Kitnot only looks appealing but also enhances comfortability by its flat pen size body and textured leather. With its extraordinary ‘S-shaped’ design airway, it provides a fun and flavorful experience for both smooth and stronger throat-hit. Emphasize the Aegis first vape pen, it plays the role of a pioneering example and reaches beyond the standard look from its durability. It polishes itself by its skin-like touch and a streamlined profile, the zinc alloy was so strong that it has more resistant to shock and scratches. 1FC Kit is powered by 550mAh built-in battery, and One Kit houses a 780mAh integrated battery, both of them operate within ONE tiny button and allow you to expect several vape sessions by its three output levels, the LEDs will indicate the status of the battery and output level. 1FC is equipped with fast charging design and is promised to fully charge in 15 minutes. One & 1FC Kit receive a 2ml vape juice capacity and supply your e-juice via the top filling system, designed for MTL vaping, then navigate your journey of vaping experience at once.

-17%

GeekVape AP2 Aegis Pod 2 Kit

Color	Clear

Proudly presents this new generation flagship set of the Geekvape Aegis series.The GeekVape AP2 Aegis Pod 2 kit supports IP67 rating, adaptive airflow, 3-position output adjustment and 4.5ml capacity.The petite form has a hard protective case, harboring a new leak-proof box design and strong protection measures.The product is embedded with an adjustable airflow feature that seamlessly switches between MTL and RDL. When you want MTL vape mode, you have to use a small hole pod intake. If you prefer RDL mode, match the intake without the small hole.The red button in the middle of the front of the product is the soul of this kit. The red button can be used for on/off button, firing, 3-position output adjustment, safety locking the device, etc. Press the button five times in a row to lock the device and the logo will flash from white, blue and green in sequence. The humanization is that you can continue vaping in the safety lock state.Press the red button to adjust the power, and the flashing message below the button will provide the power level and output power level.Leak-proof box is good to ensure product hygiene, at least to guarantee 2-3 rounds of sucking.The entire line of Geekvape G coils are available for GeekVape AP2 Aegis Pod 2 kit, guaranteeing premium taste and a great experience.

-9%

Geekvape Digiflavor XP 77W Pod Mod Kit

Color	Clear

Digiflavor XP 77W Kit is when Digiflavor meets Cyperpunk, light up the way with XP 77W Kit. Customizable LED Effects illuminating while vaping. Multi-use Digi-crown with safe lock function. Mechanical style box mod with exclusive XP POD tank.The multi use Digi-crown merges setting adjustments and firing button for a simple and seamless one stop interface, and the mod has a max 77W output off of a single 18650 battery. All your output modes are available with a simple twist of the crown button, and the XP Pod TANK is the perfect companion and compatible with Geekvape flavorful P-Coil range.Light up for the crown with the Digiflavor XP77 today.

Uwell Caliburn A3 Pod System Device

Color	Clear

Specifications:

Weight: 30 g
Colors: 6 Colors
Battery: 520 mAh
E-liquid Capacity: 2 ml
Output Power: Maximum 13 W
Materials: Aluminum Alloy, PCTG
Dimensions: 110.1 mm × 21.3 mm × 11.7 mm
Pod Specification: FeCrAI UN2 Meshed-H 1 Ω Uwell CALIBURN A3 top Refilling Pod